Hardware Overview - D-Link DIR-859 Quick Install Manual

Hardware Overview

1
1 Power LED
2 Internet LED
3 WPS LED
4
Wireless LED
5
LAN LEDs (1-4)
6 LAN Ports (1-4)
7 Reset Button
8 Internet Port
9
Power Port
10 Power Button
11 WPS Button
2 3 4
6
A solid green light indicates a proper connection to the power supply.
A solid green light indicates a connection to the Internet port.
A solid green light indicates a successful connection using WPS. The light
will blink during the WPS process.
A solid green light indicates the wireless function is working properly. This
light will blink during data transmission.
A solid green light indicates a connection to a device is working properly.
The LED will blink during data transmission.
Connect Ethernet devices such as computers, switches, and game consoles.
Press and hold the reset button with a paper clip for six seconds to reset the
router to the factory default settings. The button is located on the bottom
of the router.
Connect a broadband modem to this port using an Ethernet cable.
Connect the supplied power adapter.
Press to power the router on and off.
Press to start the WPS process. The WPS LED will blink during the process.
The light will turn solid green when successfully connecting to a device.
5
8 9 10
7
11
3