Sharp AR-M160 Online Manual page 24

3 SCAN
Scanning from a TWAIN-Compliant Application
Scanner Driver Settings
The scanner driver setup screen consists of the "Set-up screen", which lets you select scan settings, and the "Preview screen",
which shows the scanned image. For details on the scan settings, click the "Help" button in the preview screen to display Help.
Set-up screen
1
2
3
4
5
6
7
CONTENTS
"Scanning Position" menu
1
Select the location where the original is
placed. Selections are "Platen" (document
glass), "SPF (Simplex)", "SPF
(Duplex-Book)" or "SPF (Duplex-Tablet)".
☞
Scanning from a TWAIN-Compliant
Application
On machines without an SPF/RSPF,
Note
this setting is fixed at "Platen".
Scan side menu (only appears
2
when RSPF is installed)
If you placed a two-sided original in the RSPF,
select "Right Edge Fed First" or "Leading Edge
Fed First" from the scan side menu according
to the orientation of the placed original.
"Scanning Mode" menu
3
Select "Preset" or "Custom Settings"
for the scanning mode. For details on
the settings, click the "Help" button in
the preview screen to display Help.
"Zoom Preview" Checkbox
4
When this is selected, the selected part
of the preview image will be enlarged
when the "Preview" button is clicked.
To return to the regular view, remove
the checkmark.
I N D E X
(part 4)
"Zoom Preview" cannot be used
Note
when "SPF" is selected in the
"Scanning Position" menu.
"Preview" button
5
Previews the document.
If "Preview" is canceled by
Note
immediately pressing the [Esc]
key on your keyboard, or the
[CLEAR] key ( ) or [CLEAR
ALL] key ( ) on the machine,
nothing will appear in the
preview screen.
"Scan" button
6
Click to scan an original using the selected
settings. Before clicking the "Scan" button,
make sure the settings are correct.
To cancel a scanning job after
Note
clicking the "Scan" button, press
the [Esc] key on your keyboard,
or the [CLEAR] key (
[CLEAR ALL] key (
machine.
"Close" button
7
Click to close the scanner driver setup screen.
24
) or
) on the