Watermarks; How To Create A New Watermark; How To Choose A Previously Created Watermark; Sharp Ar-C360P Printing Guide - Sharp AR-C360P Printing Manual

Watermarks

NOTE
This feature is not available with the PCL 6 driver.
A watermark is typically faint text that is superimposed on a printed
document. This can be used to indicate that the document is "Draft",
or perhaps "Confidential".

How to create a new watermark

1. On the [Job Options] tab click [Watermarks...].
2. Click [New...] and enter the text for your watermark.
3. Adjust your watermark's size, angle, font, color, position and
border (trim) if required.
4. Click [OK] to accept your changes. The new watermark is
now in the Watermark list.

How to choose a previously created watermark

1. On the [Job Options] tab click [Watermarks...].
2. On the Watermarks window, select the watermark in the list.
A preview of the watermark is shown.
3. Select the [First page only] checkbox if required.
4. Click [OK].

Sharp AR-C360P Printing Guide

Finishing options> 37