Duplex (Double-Sided) Printing; Activating Duplex Printing - Sharp AR-C360P Printing Manual

Duplex (double-sided) printing

If your printer has a duplex unit installed you can print on both sides
of the paper, to save paper, weight, bulk and cost.
> Only paper can be used for duplex printing, not
transparencies or other media.
> Use paper stock of 20 - 32 lb. (75–120 g/m²). If you
experience excessive curling with 20 - 24 lb. (75–90 g/m²)
paper, use 28 lb (105 g/m²).
> Use standard sized paper stock only, e.g. A4, A3, Letter, etc.
> Load the paper print side up. Ream wrappers are usually
marked with an arrow, indicating which is the print side.
> Paper can be fed from standard paper trays, including the
high capacity feeder if you have one, but not from the
multipurpose tray.
> Do not set the paper weight to Ultra Heavy.
> Do not enable the White Page Skip function.

Activating duplex printing

1. On the driver's [Setup] tab, under [2-Sided Printing], select
the binding edge you want.
WINDOWS XP
Sharp AR-C360P Printing Guide
Finishing options> 30
WINDOWS 98