Booklet Printing; Activating Booklet Printing - Sharp AR-C360P Printing Manual

Booklet printing

Booklet printing allows printing of multipage documents with their
pages ordered and arranged so that final printed output can be
folded into a booklet. Typically, letter (or tabloid) pages would be
reduced to half-letter (or letter) and printed side by side on both
sides of letter (or tabloid) paper, so that the paper can be folded into
a booklet.
Since this feature prints on both sides of the page, it requires a
duplex unit to be installed in the printer, and 256MB of additional
memory (512MB in total).
NOTES
1. To find out how much memory is currently installed, print a
Configuration Page from the printer control panel. See the Sharp
AR-C360P User's Guide.
2. A few applications do not support booklet printing, but most do.
Note that the number of pages in a booklet is always a multiple of
four, since two pages are printed on each side of each sheet of
paper. If your document is not a multiple of four pages long, the last
one, two or three pages in your folded booklet will be blank.

Activating Booklet Printing

1. On the driver's [Setup] tab, choose [Booklet] from the
[Finishing Mode] drop-down list.
2. Click [Options...].
Sharp AR-C360P Printing Guide
Finishing options> 22