To Pause A Program; To Resume A Program From Pause; To Stop A Program - Cuisinart Precision Master SMD-50 Series Instruction And Recipe Booklet

4. To STOP the mixer, press and hold the
center of the dial until it beeps and says
STOP.
Warning: When light is flashing, avoid any
contact with moving parts.

TO PAUSE A PROGRAM

1. While in a program, press the dial once
to PAUSE.
2. The unit will go into PAUSE mode.
3. The unit will also PAUSE when the head
of the stand mixer is lifted. To lift the stand
mixer head, press down on the head-lift
release lever.
NOTE: To avoid splatter, it is recommended
to use the PAUSE feature in the dial.

TO RESUME A PROGRAM FROM PAUSE

1. If the head of the mixer has been raised,
first return the head to the down locked
position.
2. Press and hold the dial for 2 seconds.
3. The unit will beep, and then it will continue
in your selected program from the point it
was stopped.

TO STOP A PROGRAM

1. Press and hold the dial until the unit
beeps and the screen says STOP.
2. Release the dial – mixer will still be in the
selected program.
3. Press the dial to get out of STOP to return
to the Main Menu.
TO USE TIMER
1. When you first turn on the mixer, rotate
the dial clockwise to select the TIMER
setting. This mode allows you to run the
mixer at a specific speed or at various
speeds, for a set time.
2. Press the dial to select the TIMER mode.
The digital dial will flash 01:00 minute.
3. To adjust the time, rotate the dial
(clockwise to increase the time;
counterclockwise to decrease the time),
then press the dial to select the desired
time.
NOTE: The unit will change in increments
of 10 seconds. Maximum time setting is
60 minutes.
4. To adjust the speed setting (from 1 to 12),
turn the dial to select the desired speed
and then press the dial to set. The unit
will then start to mix. PAUSE the MIXING
at any time by pressing and releasing the
dial once. Hold the dial for 3 seconds and
the unit will display STOP for a moment
and then return to the Main Menu.
5. MIXING process automatically stops when
total time has elapsed. One tone signals
shutoff.
TO TURN STAND MIXER OFF
Press and hold the center of the dial for 5
seconds when the unit is running and it will
stop. After 5 minutes of inactivity, the unit will
go into Standby mode and the digital dial will
turn off. Unplug from the outlet when not in use.
TO USE THE PRESET PROGRAMS
FOR DIFFERENT RECIPE TASKS
PROGRAM 1: DOUGH
Use this program for yeasted bread and
pizza doughs. Follow instructions below to
use program and refer to dough recipes in
the recipe section as a guide.
1. Gather ingredients and put liquid, sweetener
(if using), and yeast into the mixing bowl.
2. Connect the dough hook to the mixer.
3. Rotate the dial clockwise to select the
DOUGH setting. Press the dial to activate.
4. Rotate the dial clockwise to select the
desired program: PIZZA DOUGH, WHITE
BREAD, WHOLE WHEAT.
5. Once the desired recipe task is selected,
press the dial and the mixing process will
begin.
6. After the kneading is complete, the unit
will stop and a 60 minute countdown
timer will begin. This is for proofing the
bread dough. It is recommended to first
remove the dough, shape into a smooth
ball and place back into the mixing bowl.
Cover with a damp towel or plastic wrap
and allow to proof for the allotted time.
NOTE: This program is designed to mix and
knead ingredients for a yeasted dough. There
may be some recipes that require the user to
6