Table of Contents
Advertisement
ERASE
This copier has an edge erase mode and a center erase mode.
Edge erase
A
A
G
Edge erase can be used to eliminate shadow lines around the edges of copies which appear when
thick paper or a book is used as an original.
G
Center erase can be used to eliminate the shadow produced by the bindings of bound documents.
G
Edge + center erase can be used together to eliminate both types of shadow lines.
G
The standard erase width is 1/2", but can be changed from 1/4" to 1" in 1/4" increments.
#KEY OPERATOR The initial setting of the width for edge erase and center erase can be changed.
See page 11 of the KEY OPERATOR'S GUIDE.
G
This feature cannot be used with the 2 in 1 or 4 in 1 feature.
G
If the dual page copy feature has been set, center erase and edge + center erase cannot be set.
G
This feature cannot be used with non-standard size originals.
1
Place an original on the platen glass or in the document feeder tray.
2
Press the SPECIAL FUNCTION key. Then press the OK key.
G
The SPECIAL MODES screen will appear.
3
Use the
and
G
The setting screen for ERASE will appear.
Center erase
A B
A B
Document feeder tray
keys to select "ERASE" and press the OK key.
Edge + Center erase
A B
SPECIAL MODES
MARGIN SHIFT
ERASE
DUAL PAGE COPY
[OK]:ADJUST
ERASE
OFF
EDGE
CENTER
-----
1/2
inch(1/4~1)
A B
3
47
Advertisement
Table of Contents
