Troubleshooting; Problems And Solutions - Sharp UX-510 Operation Manual

12

Troubleshooting

Problems and Solutions

Note: For problems with an answering machine hookup, see "If you have por-
blems" in Chapter 7, "Answering Machine Hookup".
Problem
Nothing appears in the dis-
play.
The fax does not respond
when you press any of its
keys.
Dialing is not possible.
The power is on, but no
transmission takes place.
Check and remedy
Make sure the power cord is properly plugged
into a power outlet.
Connect another electrical appliance to the
outlet to see if it has power.
If a beep sound is not made when you press the
keys, unplug the power cord and then plug it
back in several seconds later.
Make sure the power cord is properly plugged
into a power outlet.
Make sure that the telephone line is properly
connected to both the TEL. LINE jack and the
wall jack.
Make sure that the fax is set to the correct
dialing mode for your telephone line. See Option
Setting 8 in Chapter 9.
Make sure that the receiving machine has fax
paper.
Make sure that the telephone line cord is
plugged into the "TEL. LINE" jack, and not the
"TEL. SET" jack.
If the receiving machine is in manual mode with
no attendant, reception will not be possible.
If the receiving machine is not a Sharp model,
make sure it is G3 compatible.
Check the display for error messages.
Pick up the handset and check for a dial tone.
85