Table of Contents
Advertisement
2. Before painting, gentle polishing using a
very fine polishing agent may be carried
out locally if required (e.g. if there are any
uneven edges). The surface is thoroughly
cleaned (grease and salt should be
removed) and left to dry.
3. Stir the primer well and apply using a fine
brush, a matchstick or similar. Finish off
with a basecoat and clearcoat once the
primer has dried.
For scratches, implement the same procedure
but mask around the damaged area to protect
the undamaged paintwork.
Touch-up pens and spray paints for touching
up paintwork are available from Volvo dealers.
NOTE
If the stone chip has not penetrated down
to the meal and an undamaged layer of
paint remains in place, fill in with base coat
and clear coat as soon as the surface has
been cleaned.
Related information
Car paintwork (p. 658)
•
Colour codes (p. 659)
•
Colour codes
Colour code
The decal for the colour code is positioned on
the car's right-hand door pillar between the
front and rear door and will be visible when
the right-hand rear door is opened.
Exterior colour code
Any secondary exterior colour code
Related information
Car paintwork (p. 658)
•
Touching up minor paintwork damage
•
(p. 658)
MAINTENANCE AND SERVICE
Replacing windscreen wiper
blades
The wiper blades sweep water away from the
windscreen. Together with washer fluid, they
aim to clean the windscreen and ensure visi-
bility while driving. The wiper blades can be
replaced.
}}
659
Advertisement
Table of Contents
