Table of Contents
Advertisement
IMPORTANT
Avoid washing the car with cleaning agent
with a pH value lower than 3.5 or higher
than 11.5. This may result in discolouration
of anodised aluminium parts such as roof
rack and around the side windows.
Never use metal polishing agent on ano-
dised aluminium parts, this can result in
discolouration and destroy the surface
treatment.
Related information
Cleaning the exterior (p. 651)
•
Polishing and waxing (p. 651)
•
Handwashing (p. 652)
•
Automatic car wash (p. 654)
•
High-pressure washing (p. 655)
•
Cleaning the wiper blades (p. 655)
•
Cleaning wheel rims (p. 657)
•
Rustproofing (p. 657)
•
Cleaning wheel rims
The car should be washed as soon as it
becomes dirty. The longer the car is left dirty,
the more difficult it will be to get it com-
pletely clean and there is a risk of scratching
the paintwork. Perform the cleaning in a car
wash with oil separator. Use car shampoo
that is recommended by Volvo.
Use rim cleaning agent recommended by
Volvo.
Strong rim cleaning agents can damage the
surface and cause stains on chrome-plated
aluminium rims.
Related information
Cleaning the exterior (p. 651)
•
Polishing and waxing (p. 651)
•
Handwashing (p. 652)
•
Automatic car wash (p. 654)
•
High-pressure washing (p. 655)
•
Cleaning exterior plastic, rubber and trim
•
components (p. 656)
Cleaning wheel rims (p. 657)
•
Rustproofing (p. 657)
•
MAINTENANCE AND SERVICE
Rustproofing
The car has protection against corrosion.
Anti-corrosion protection for the body consists
of metallic protective coatings on the sheet
metal, a high-quality painting process, corro-
sion-protected and minimised metal overlap,
and shielding plastic components, abrasion
protection and supplemental rust inhibitor on
exposed areas. In the chassis, exposed com-
ponents of the wheel suspension are made of
corrosion-resistant cast aluminium.
Inspection and maintenance
The car's anti-corrosion protection normally
requires no maintenance, but a good way to
reduce the risk of corrosion is to keep the car
clean. Strong alkaline or acidic cleaning solu-
tions must be avoided on glossy trim compo-
nents. Any stone chips should be rectified as
soon as they are discovered.
Related information
Cleaning the exterior (p. 651)
•
Polishing and waxing (p. 651)
•
Handwashing (p. 652)
•
Automatic car wash (p. 654)
•
High-pressure washing (p. 655)
•
Cleaning the wiper blades (p. 655)
•
Cleaning exterior plastic, rubber and trim
•
components (p. 656)
Cleaning wheel rims (p. 657)
•
657
Advertisement
Table of Contents
