Table of Contents
Advertisement
Related information
Deactivating the start/stop function
•
(p. 459)
Conditions for the Start/Stop function
•
(p. 459)
Start/stop function (p. 457)
•
Help when starting on a hill (p. 440)
•
Automatic braking when stationary
•
(p. 439)
Deactivating the start/stop
function
In certain situations it may be desirable to
deactivate the start/stop function.
Deactivate using the
Stop
function button in the
centre display's function
view. The indication in the
button is switched off when
the function is deactivated.
The function is deactivated until
it is reactivated
•
the drive mode is changed to
•
Comfort
the next time the car is started.
•
Related information
Driving with start/stop function (p. 457)
•
Conditions for the Start/Stop function
•
(p. 459)
Conditions for the Start/Stop
function
For the Start/Stop function to work requires
that a number of conditions are met.
Start/
If any condition is not met, this will be indi-
cated in the driver display.
The engine does not auto-stop
The engine does not auto-stop in the following
cases:
The car has not reached approx. 10 km/h
•
(6 mph) after starting.
After a number of repeated auto stops,
•
Eco
or
speed must again exceed approx. 10 km/h
(6 mph) before the next auto stop.
The driver has not fastened the seatbelt.
•
The engine is not at normal operating tem-
•
perature.
The ambient temperature is below
•
approx. -5 °C (23 °F) or above
approx. 30 °C (86 °F).
The windscreen's electric heating is acti-
•
vated.
The environment in the passenger com-
•
partment deviates from the set values.
The car is in reverse.
•
The driver is making large steering wheel
•
movements.
The road is very steep.
•
STARTING AND DRIVING
}}
459
Advertisement
Table of Contents
