Volvo S90 2020 Owner's Manual page 645

Replacing the main beam lamp
The main beam bulb in the halogen headlamp
can be replaced without assistance from a
workshop.
Before the bulb can be replaced, the plastic
cover over the headlamp must be removed.
IMPORTANT
Never touch the glass part of the bulbs
with your fingers. Grease from your fingers
is vaporised by the heat, coating the reflec-
tor and then causing damage.
Left-hand headlamp.
1. Detach the headlamp's rubber cover for
the main beam bulb.
2. Detach the bulb by turning the bulb holder
upward and then pulling straight out.
3. Carefully prize the plastic cover at the con-
nector's lock lug so that the lock lug relea-
ses.
4. Unplug the connector from the bulb.
5. Replace the bulb.
6. Fit the bulb in the socket and screw in.
7. Refit the headlamp's rubber cover.
Related information
Exterior lamp positions (p. 641)
•
Removing the plastic cover for bulb
•
replacement (p. 640)
Bulb specifications (p. 645)
•
MAINTENANCE AND SERVICE
Replacing daytime running light
bulb/position lamp bulb, front
The daytime running light bulb/position lamp
bulb in the halogen headlamp can be
replaced without assistance from a work-
shop.
Before the bulb can be replaced, the plastic
cover over the headlamp must be removed.
NOTE
The bulb for the daytime running light/
position lamp is easier to access if the
main beam bulb is detached. The main
beam bulb is fitted diagonally above the
daytime running light bulb/position lamp
bulb. Detach the main beam bulb by rotat-
ing its bulb holder upwards and then pull-
ing straight out.
IMPORTANT
Never touch the glass part of the bulbs
with your fingers. Grease from your fingers
is vaporised by the heat, coating the reflec-
tor and then causing damage.
}}
643