Table of Contents
Advertisement
Buttons for seat folding, located on the upper section
of the rear seat.
1.
Ensure that there are no occupants or
objects in the rear seat.
2. Lower the centre seat's head restraint
manually.
3. Press and hold one of the buttons located
in the parcel shelf on the left-hand side of
the car.
4. The seat is released from the lock but
remains in the same position. The head
restraints are lowered automatically.
5. Lower the backrest manually to the hori-
zontal position.
Raising the backrest
Raising the backrest to upright position is car-
ried out manually:
1.
Move the backrest up/back.
2. Press the backrest until the lock engages.
3. Raise the head restraints manually.
4. If necessary, raise the centre seat's head
restraint.
WARNING
Check that the backrests and head
restraints in the rear seat are locked prop-
erly after being folded up.
The head restraints of the outer seats must
always be raised when there are passen-
gers on any of the rear seats.
Related information
Adjusting the head restraints in the rear
•
seat (p. 195)
Private locking (p. 283)
•
Activating and deactivating private locking
•
(p. 283)
SEATS AND STEERING WHEEL
Adjusting the head restraints in the
rear seat
Adjust the centre seat head restraint accord-
ing to the height of the passenger. Fold down
the outer seat head restraints* to improve
rearward visibility.
Adjust the head restraint for the
centre seat
The centre seat's head restraint must be
adjusted according to the passenger's height
so that, if possible, the whole of the back of
the head is covered. Slide it up manually as
required.
* Option/accessory.
}}
195
Advertisement
Table of Contents
