Table of Contents
Advertisement
4.
Press Enter twice.
5.
Select Exit menu and confirm Exit Saving Changes is highlighted; then press
Enter
6.
Confirm Yes is highlighted and press Enter. The system restarts.
Boot Menu
Boot Sequence specifies the order in which your computer is to make a check for a
device to boot the system. Press Enter to open the sub menu. The system boots from
the drive at the top of the list. If the system cannot find the drive, it will boot from the
second one; then, third one. Use arrow keys to select the drive you want to move;
then, use minus key or space bar to move it up and down.
LAN Boot defines whether the system boots from other server via the LAN unit of
your computer.
Wake On LAN defines whether the system boots up or resumes from System
Hibernate when the LAN unit of your computer becomes active. This setting functions
only when your computer is connected to AC power.
6
Exit Menu
Exit Saving Changes saves the settings you have changed and exits the Setup Utility.
Exit Discarding Changes exits the Setup Utility without saving the settings you have
changed.
Load Setup Defaults returns the values of all items to the default. To exit, select one
of the above items.
Discard Changes returns the values of all items to the values you last saved. To exit,
select one of the above two items.
Save Changes saves the settings you have changed. To exit, select one of the above
two items.
6-6
Advertisement
Table of Contents
