Setting Up Windows - Sharp PC-AV18 Series Operation Manual

Setting Up Windows

To setup Windows, follow the instructions on the screen. See also the Windows quick
start guide. It takes approximately 5-10 minutes to complete the entire setup process.
The steps in the setup process are as follows:
•
1
Configuring your location, language and keyboard type
•
Configuring your time zone
•
Accepting license agreement
•
Naming your computer
•
Creating an account
•
Completing configuration
After completing the Windows setup, confirm Time Zone is correctly selected and set
the date and time by double-clicking the time appearing on the right of the taskbar to
open Date and Time Properties dialog box.
1-4
• Do not turn off your computer until completing Windows setup. If you
turn it off, you may not be able to set up Windows later.
• Be sure to connect your computer to AC power source. An
undercharged battery may not be able to complete the Windows setup.
• Do not connect any peripheral devices to your computer until the
Windows setup is completed. Otherwise your computer may
malfunction.
• If the display turns off, some power management may function. In this
case, press any key to resume your computer from the power
management.
• If you cannot operate the keyboard or the glide pad, press the power
button for more than four seconds to turn off your computer. Be sure
that the power indicator turns off; then, after more than 10 seconds,
press the power button to turn on your computer again.