Sharp PC-AV18 Series Operation Manual page 104

15. When the re-installation is completed, the system restarts automatically.
16. When the message Press <F2> to enter SETUP appears, remove the Product
Recovery CD-ROM disk 3 and press F2. The Setup Utility opens.
17. In the Exit menu, select Load Setup Defaults; then, press Enter twice.
18. In the Exit menu, confirm Exit Saving Changes is highlighted and press Enter
twice. The system will restart again.
19. Set up Windows XP by following the instructions on the screen. When you
finish the setup, the recovery is completed. Make sure to set date and time.
A-15