Editing With The Dv Terminal (Ieee1394) - Sharp Viewcam VL-Z7U Operation Manual

Advanced Features
Playback
Editing with the DV
Terminal (IEEE1394)
Available mode:
Tape Playback
This camcorder can be used as a digital
video editor. A DV cable transfers all
dubbing signals including video and audio
directly to the camcorder.
Preparation
Connect the camcorder to video equipment
with a DV terminal using a commercially
available DV cable.
To DV
Video equipment
terminal
with DV terminal
(e.g. DV camcorder)
DV cable (commercially available)
To DV
terminal
64
To Record to Video Equip-
ment
See "Cutting Unwanted Sequences" on
page 61, using the video equipment as the
recording source.
Note:
• Make sure that the video equipment to which
you are recording can input dubbing signals
via the DV terminal.