Sharp Viewcam VL-Z7U Operation Manual page 19

Displayed for
5 seconds
The card is not inserted or is inserted improperly. Check that it is
NO
properly inserted (see page 11).
MEMORY CARD
The capacity of the card is full and cannot store any more images.
MEMORY CARD
Delete unnecessary images (see page 82) or replace the card with
FUL L
a new one (see page 11).
The card has no images recorded in the format the camcorder can
NO DA T A ON
recognize.
MEMORY C ARD
The images in the card are corrupted or recorded in a format
MEMORY C ARD
which is not compatible with this camcorder. Format the card to
ERROR
use it with this camcorder (see page 77)*.
The card has not been formatted with this camcorder. Format the
F ORMA T
card (see page 77)*.
MEMORY C ARD
MEMORY C ARD
The card is write-protected (see page 11).
PROT E C T ED
You are trying to delete a protected image. Cancel the protection
DA T A
setting (see page 81).
PROT E C T ED
The selected image cannot be read by this camcorder. Format the
MEMORY CARD
RE AD ERROR card to use it with this camcorder (see page 77)*.
C ANNO T The card cannot record any data due to a problem with the card or
S TORE DA T A
data on the card. Replace the card (see page 11).
The camcorder cannot record with the Start/Stop button in Card
PL E AS E USE
PHOTO BUT TON
Recording mode. Press the PHOTO button (see page 73).
MAX I MUM
The print order cannot be set to more than 999 images.
9 9 9 IMAGE S
You cannot record any image with a file number bigger than 999–
MAX I MUM
9999. Set FILE NO. menu item to "RESET" (see page 78), then
F I L E NUMBER
format the card (see page 77)* or replace the card with a new one
(see page 11).
* Formatting a card erases all stored images, including delete-protected images. Be sure to
backup important data on your computer or other media before formatting the card.
Note:
• N indicates a flashing display.
Description of warning
5