Digital Image Stabilization (Dis) - Sharp Viewcam VL-Z7U Operation Manual

Digital Image
Stabilization (DIS)
Available mode:
Tape Camera
The digital image stabilization (DIS) function
allows you to stabilize the image by
electronically compensating for relatively
minor image shaking that is often annoying
in close-up shots.
1
In Tape Camera mode, press the
DISPLAY button until the mode
screen appears.
2
Press l or m on the Operation
button to select "MENU", then press
the center of the Operation button.
3
Press l or m to select "EXECUTE",
then press the center of the Operation
button.
4
Press l or m to select Y, then
press the center of the Operation
button.
5
Press l or m to select "DIS", then
press the center of the Operation
button.
S E T T I N G 2
D I S
1 6 : 9
A U D I O MO D E
W I N D
R E T U R N
6
Press l or m to select "ON", then
press the center of the Operation
button.
D I S ON
7
Press the DISPLAY button to turn off
the menu screen.
• The DIS indicator only appears when
the on-screen indicators are turned
on.
To cancel DIS function
Select "OFF" in step 6 above. The z
indicator will disappear.
Notes:
• The DIS function cannot compensate for
excessive image shaking.
• When image shaking does not occur (e.g.
when using the camcorder on a tripod), turn
off the DIS function. The picture will appear
more natural when the DIS function is off.
ON
O F F
DIS indicator
T A P E
39