Travel Mode Switch; Travel Alarm (Optional) - Hitachi ZAXIS 120-6 class Operator's Manual

Travel Mode Switch

d
WARNING: Tipping-over accidents can cause serious
personal injury. Do not change travel mode switch (1)
while traveling. In particular, changing to fast mode
(2) while descending a slope is very dangerous. Always
stop the machine before changing the travel speed
mode.
Turn travel mode switch (1) on the switch panel to the
specified position to select the travel mode (Fast/Slow).
 Fast Mode: Turn travel mode switch (1) to
position.
 Slow Mode: Turn travel mode switch (1) to
position.
Mark (Fast Speed Mode)
Mark (Slow Speed Mode)

Travel Alarm (Optional)

During travel operation, the travel alarm sounds to warn
people near the machine that the machine is traveling.
Deactivating Travel Alarm
More than 12 seconds after starting to travel the machine,
raise the armrest and push travel alarm deactivation switch
(4) to stop the travel alarm. (Within 12 seconds, travel alarm
deactivation switch (4) is inoperable.)
When restarting travel after stopping, the travel alarm
will sound again. To stop the alarm, push travel alarm
deactivation switch (4) again.
f
NOTE: The optional switch locations differ depending on
what kinds of optional devices are equipped. Before using
the switches, make sure what kinds of optional devices are
equipped.
DRIVING THE MACHINE
mark (2)
mark (3)
4-3
1
3 2
1
4
MDCD-01-026
MDCD-01-028
Optional Switch
MDAA-01-327
M1U1-01-035