Selecting The Input Source; Channel Selection; Display Channel Information; Volume Adjustment - Logik L22LDIB11 Instruction Manual

Selecting the Input Source

1. Press the
on the remote control to display the Input source list.
2. Press the
SCART / YPbPr / PC / HDMI1 / HDMI2 / AV / DMP.
3. Press the OK button to confirm your selection.
Alternative
Press the TV.RD button to switch to TV / digital radio channels directly.
GB

Channel Selection

• Press the CH + / – buttons on the remote control repeatedly or the 0-9
buttons to select the channel.
Alternative
Press the LIST button to enter the Channel List. Then use the
buttons to highlight and select the channel. Press the OK button to
view the selected channel.
If a blocked channel is selected, the password screen will be displayed.
Press the 0-9 buttons to enter the password, the channel will then be
unlocked (refer to page 21-22 for details on Channel Edit).
• Press the FAV button to view the Favourite List. Then use the
to highlight and select the channel. Press the OK button to view the selected
channel (refer to page 21-22 for details on Channel Edit).
• Press the

Display Channel Information

• Press the i button to view the current information.

Volume Adjustment

• Press the VOL + or – button on the side panel of the TV or on the remote control to adjust the volume.
• If you wish to switch the sound off, press the
audio listening.
18
button on the right side panel of the TV or the INPUT button
buttons to select the input source that you want: DTV / ATV /
button to return to the previously viewed channel.
buttons
MUTE button. Press the MUTE button again or the VOL + button to resume
Input Source
DTV
ATV
SCART
YPbPr
PC
HDMI1
HDMI2
AV
DMP
OK