Table of Contents
Advertisement
DVG-3032S/3016S User's Manual
3-2-6 Hot Line
General Settings → Hot Line
Enable: Tick the check box to enable a line. If some lines are not used, disable them (Pause Function) to
avoid unnecessary waiting when an incoming call is diverting to the line.
Hot Line: Check to direct the call automatically to a pre-configured destination without any action when
there is incoming call from PBX line to FXO port(Calls from PBX Line to FXO then direct forward to an
assigned VoIP number).
Hot Line No.: Enter the number for pre-defined destination.
Warm Line: Enter the time for the call to start with a pause, so the user can dial another number. The call
will be automatically directed to the pre-configured destination within timeout period.
Dial-out Prefix: It is the number dialed for prefix automatically by FXO when the DVG transit-out calls from
VoIP to FXO.
FXO Line Default Dial-Out: The number FXO will dial out when it receive an incoming call from VoIP.
D-Link Systems, Inc.
VoIP Gateway Configuration
31
Advertisement
Table of Contents
