Table of Contents
Advertisement
5.2 Accessories
All the following accessories are available.
Standard Accessories
Sketch
5.3 Open Source Information
General Information:
Kernel Version
Supported File system
Drivers
Linux Applications
U_boot Version
License: GPLV2
QC1936 Digital Storage Oscilloscope
Description
X1, X10 two passive probes. The passive probes have a 6MHz bandwidth
(rated 100Vrms CAT III) when the switch is in the X1 position, and a
maximum bandwidth (rated 300Vrms CAT II) when the switch is in the X10
position. Each probe consists of all necessary fittings.
A USB A-B line, used to connect external devices with USB-B interface
like a printer or to establish communications between PC and the
oscilloscope.
A power cord special for this product. In addition to the power cord shipped
with your instrument, you may purchase another one certified for the
country of use.
A software installation CD. It contains the user manual of QC1936, giving
particular descriptions on the QC1936 oscilloscopes.
*. To this digital storage oscilloscope, the PC software is not important, not
much advanced functions were developed. For example, 1. for the
function of "export into Excel format", there is aleady "Save into CSV"
function on the oscilloscope 2. Export is only possible with BMP
format,etc.
Linux3.2.35
Yaffs, Fat32
Buzzer Driver, DMA Driver, FPGA Driver, I2C Driver,SPI Driver,
IO-bank Driver, USB Host Driver, LCD Driver, USB
massstorage、gadget Driver
busybox1.18.4, gnupg1.4.11
Vivi_3.2.35
See Appendix B
Specifications
75
Advertisement
Table of Contents
