Table of Contents
Advertisement
See below for waveform menus.
The white waveforms on the menu is
the recalled RefA waveform
Note: The oscilloscope will save the current settings if you wait 5 seconds after the last
modification, and it will recall these settings the next time you power on the oscilloscope.
2.10 Display System
[DISPLAY] is a function key of the display system.
Page 1 of the display system function menu:
Option
Setup
Vector
Type
Dots
Auto, 0.2s
0.4s, 0.8s
Persist
1.0s,2.0s
4.0s、8.0s
∞
YT
Format
XY
Contrast
Page 1/2
Page 2 of the display system function menu:
Option
Setup
Dotted line
Grid
Real line
Off
Grid
QC1936 Digital Storage Oscilloscope
Description
The sampling points are displayed in a link line manner.
No interpolation link line is displayed between the sampling points.
Display sample points directly
Set the maintained display time length of each displayed sampling
point.
YT format shows the vertical voltage in relation to time (horizontal
scale); XY format displays a dot between CH1 and CH2 each time
0-15 16 ranks adjustable, with a progress bar to display; Press F5 to
select this option. Turn the multi-functional knob to adjust.
Skip to the next page.
Description
Only horizontal coordinate and vertical coordinate in the middle of the
level will display on the screen when grid is off.
0-15 16 ranks adjustable, with a progress bar to display
At most 9 groups of
setups can be stored
Basic Operation
31
Advertisement
Table of Contents
