Instrument and control functions
1
1. Rider seat height position adjuster
2. "L" mark
3. Match mark
4
4. Insert the projection on the rear of
the rider seat into seat holder A as
shown.
1. Projection
2. Seat holder A (for low position)
To change to the high position
1. Remove the rider seat.
2. Remove the rider seat height posi-
tion adjuster by pulling it out.
1
1. Rider seat height position adjuster
3
2
1
2
3. Install the rider seat height posi-
tion adjuster so that the match
mark is aligned with the "H" mark
as shown.
1
1. Rider seat height position adjuster
2. "H" mark
3. Match mark
4. Insert the projection on the rear of
the rider seat into seat holder B as
shown.
1. Projection
2. Seat holder B (for high position)
TIP
Make sure that the rider seat is proper-
ly secured before riding.
4-33
3
2
1
2