Samsung SNP-3370TH User Manual page 84

Chapter 4. Using Web Viewer
Auto Release
Off
Auto
Return Time
Setting
Off
On
Indicator
Pointer
Target
Stop
Lost Mode Research
Zoom Out
■ Target Lock Setup
Target Lock is useful to select and follow an object using the Auto Track mode while operating
the camera with the joystick. Target Lock can be turned On or Off.
To activate the Auto Track mode, turn on Target Lock, select an object to follow, and then
press Enter.
■ Trace Zone Setup
Category
Tracking Zone
Tracking Mask
NETWORK PTZ CAMERA
Enables setting a maximum duration to follow an object. When the duration
expires, the camera stops following the object and returns to the start position to
follow another objects.
Commands the camera to stay on the location the last object stopped at instead
of returning to the initial position.
Sets a duration for the camera to standby upon the Auto Release expiration and
then return to the start position.
Disables the Indicator function.
Indicates both the pointer and target.
Indicates the indicator when following an object using the joystick; shows as a
cross in the center of the screen.
Indicates the camera's target for the Auto Track operation; when a moving object
is detected, a square grid appears and surrounds the object.
Commands the camera to stop and abort tracking at the spot where its object
disappeared.
Commands the camera to stop and standby at the spot where its object
disappeared.
Commands the camera to zoom out and look for a new object in case its current
object disappears.
Setup Tracking area.
Setup whether to show the set Mask area on screen.
User Manual
84
Description