Chapter 3. Installing Camera & Network Setup
1. Select a camera in the search list.
Find the MAC (Ethernet) address labeled on
the rear of the camera.
Both the [Auto Set] and [Manual Set]
buttons will be activated.
2. Click [Auto Set].
The Auto Setting dialog appears.
The <IP Address>, <Subnet Mask>, and <Gateway> will be set automatically.
3. Enter the password.
This is the login password for the "admin" user who accesses the camera.
The default password is "4321".
4. Click [OK].
Auto network setup will be completed.
NETWORK PTZ CAMERA
User Manual
42