Lenovo IdeaCentre AIO 3 Hardware Maintenance Manual page 68

6. Reinstall the removed parts in reverse order of the removal steps mentioned above.
7. Reconnect all disconnected cables to the computer and reconnect the power cord to the electric outlet.
Storage drive (without door)
For models without storage drive door, please refer below replacement procedure to remove the storage
drive and storage drive bracket.
Replacement procedure
1. Disconnect the signal cable and the power cable from the storage drive.
2. Remove the computer stand cover. See "Computer stand cover" on page 60.
3. Remove the computer stand. See "Computer stand" on page 60.
4. Remove the computer cover. See "Computer cover" on page 65.
5. Remove one screw. Remove the storage drive and the bracket.
6. Remove the storage drive from the bracket.
7. Install the new storage drive.
8. Reinstall the removed parts in reverse order of the removal steps mentioned above.
9. Reconnect all disconnected cables to the computer and reconnect the power cord to the electric outlet.
64
IdeaCentre AIO 3 Hardware Maintenance Manual