Processor; Removing The Processor - Dell Alienware Aurora R16 Owner's Manual

Steps
1. Align and place the left liquid-cooling assembly fan on the liquid-cooling assembly.
2. Replace the four screws (#6-32x1/4") that secures the left liquid-cooling assembly fan to the liquid-cooling assembly.
3. Align and place the right liquid-cooling assembly fan off the liquid-cooling assembly.
4. Replace the four screws (#6-32x1/4") that secures the right liquid-cooling assembly fan to the liquid-cooling assembly.
Next steps
1. Install the left-side cover.
2. Follow the procedure in

Processor

Removing the processor

CAUTION: The information in this removal section is intended for authorized service technicians only.
Prerequisites
1. Follow the procedure in
2. Remove the left-side cover.
3. Remove the processor liquid-cooling assembly
About this task
The following images indicate the location of the processor and provide a visual representation of the removal procedure.
After working inside your
Before working inside your
or processor fan and heat-sink
computer.
computer.
assembly, as applicable.
81