Dell Alienware Aurora R16 Owner's Manual page 104

Table 20. System setup options—Advanced menu (continued)
Advanced
Auto OS Recovery Threshold
SupportAssist OS Recovery
Table 21. System setup options—Security menu
Security
Unlock Setup Status
Admin Password Status
System Password Status
Admin Password
System Password
Password Change
Absolute
Firmware TPM
PPI Bypass for Clear Command
UEFI Firmware Capsule Updates
Windows SMM Security Mitigations Table (WSMT)
Enable Pre-Boot DMA Protection
Enable OS Kernel DMA Support
Secure Boot
104
Default: 2
Allows you to configure the Auto OS Recovery Threshold.
Default: 2
Allows you to enable or disable the SupportAssist OS Recovery.
Default: Enabled
Displays the unlock setup status.
Displays whether the admin password is set.
Default: Not Set
Displays whether the system password is set.
Default: Not Set
Enables the user to set, change, or delete the admin
password.
Enables the user to set, change, or delete the system
password.
Allows you to enable or disable password change on the
computer.
Default: Permitted
Enable or disable the BIOS module interface of the
optional Absolute Persistence Module service from Absolute
Software.
Default: Enabled
Displays the firmware TPM state.
Default: Enabled
Enable or disable the TPM Physical Presence Interface (PPI).
When enabled, this setting will allow the OS to skip BIOS PPI
user prompts when issuing the Clear command. Changes to
this setting take effect immediately.
Default: Disabled
Enables or disables BIOS updates through UEFI capsule
update packages.
Default: Enabled
Enables or disables Windows SMM Security Mitigation
protections.
Default: Disabled
Enables or disables Pre-Boot DMA Protection.
Default: Enabled
Enables or disables OS Kernel DMA Support.
Default: Enabled