Dell Alienware Aurora R16 Owner's Manual page 91

5. Remove the memory module.
6. Remove the single-graphics
7. Remove the M.2 2230 solid-state drive
8. Remove the wireless card.
9. Remove the processor liquid-cooling assembly
10. Remove the processor.
11. Remove the VR heat sink.
About this task
The following image indicates the connectors on your system board.
1. Coin-cell battery
card.
or the M.2 2280 solid-state drive
or processor fan and heat-sink
in SSD slot one or slot two, as applicable.
assembly, as applicable.
2. Lower front-chassis fan connector (FAN_SYS2)
91