Ch/Input Id - Sharp 27F640 Operation Manual

CH/Input ID (Continued)
5
Use CH a/s or REMOTE KEYPAD to select each desired channel
to label.
Press INPUT on the Remote to label the INPUT mode.
ID: Labeling the channel name
Press VOL k/l to select "ID", then press VOL k to select the
first character. Press CH a/s to enter a desired letter. Press VOL
k/l to enter the next desired letter. Press MENU to return to the
CH/INPUT ID screen.
Selectable characters:
Space: _
Alphabets: A-Z
Numbers: 0-9
Symbols: — . & ( ) / +
RESET : Resetting the ID to "_ _ _ _"
Press CH a/s to move the "E" mark to "RESET", then press
VOL k/l. The previously set ID will turn to "_ _ _ _".
6
Press MENU to exit.
Note:
• The maximum number of ID labels available to register channel names is 20 for AIR channels and 40
for CABLE channels.
• If you wish to register a new ID when all the available ID labels are assigned, delete a registered ID
to make room.
1 2 3
CH
4 5 6
or
7 8 9
ENTER
CH
0 100
CH
→ →
CH
→
MENU
CH
CH
MENU
: _ _ _ _
I D
RESET
MENU : RETURN
(ID Input screen)
I D : TV 1 2
RESE T
MENU : RETURN
(Example: TV12)
I D : TV 1 2
RESE T
MENU : RETURN
: _ _ _ _
I D
RESET
MENU : RETURN
37