Sharp 27F640 Operation Manual page 40

Using the Video and Audio Input Terminals (Continued)
Notes:
• COMPONENT terminals are DVD compatible, allows you to enjoy the highest quality playback
image than the image from IN 1 S-VIDEO terminal.
• The IN 1 S-VIDEO terminal is used to obtain a higher quality image by importing image signals.
• The S-VIDEO terminal is for the video image only. To receive an audio signal, connect the audio
cable to the IN 1 AUDIO terminals (left and right).
VCR
•
To watch video material play back
• Press the Remote's INPUT button to select the VIDEO INPUT mode for the video equipment you
wish to play.
• The external VIDEO INPUT mode will change as follows each time the INPUT button is pressed.
AIR INPUT 1
or (IN 1)
CABLE Rear
• When the AV cables are connected to the VIDEO INPUT 3 and COMPONENT Y, P
simultaneously, the COMPONENT terminal has priority over the VIDEO terminal.
• INPUT mode can be selected by pressing either the CH
set to the highest channel stored in memory, or by pressing the CH
channel.
Note:
• When connecting video or audio equipment to the television, be sure that the power is turned off in
order to prevent damage to either the television or the equipment being connected.
• The S-Video terminal has priority over the VIDEO terminal (IN 1). When you wish to use video
equipment connected to the VIDEO terminal (IN 1), unplug equipment connected to the S-VIDEO
terminal.
• For detailed information on the connection and use of auxiliary equipment, refer to the instruction
manuals of the equipment being used.
• The connection cables/cords can be obtained from your local video store.
40
TO S-VIDEO OUTPUT
(When your video
equipment has an
S-VIDEO output terminal).
To VIDEO OUTPUT
To AUDIO OUTPUT (L)
To AUDIO OUTPUT (R)
INPUT 2 INPUT 3 (COMPONENT)
(IN 2)
Front
(Rear connection terminals of TV)
(IN 3)
Rear
on the TV remote control when the TV is
a
To AUDIO
OUTPUT (L/R)
Video Equipment with Component
video (Component Color)
Output Terminals (Y, P
B
when it is set to the lowest
s
To COMPONENT
VIDEO OUTPUT
Terminals
and P )
B R
and P terminals
R