Audio Adjust - Sharp 27F640 Operation Manual

Audio Select (Continued)
5
Press VOL k/l to select "STEREO", "SAP" or "MONO" when the
"E" mark is at "MTS".
MTS SPEAKER
STEREO ON
SAP OFF
MONO
H AUDIO ADJUST
When the "E" mark is at "AUDIO ADJUST", press VOL k/l to
access the AUDIO ADJUST screen. To access the desired item,
press CH a/s. To adjust the audio setting, press VOL k/l.
TREBLE BASS
Selected item VOL k button
TREBLE
BASS
BALANCE
RESET
6
Press MENU to exit.
An example screen displaying ON AIR when receiving stereo broadcasts
Current channel number
"← ON AIR" will appear next to STEREO or
SAP when receiving STEREO or SAP
broadcasts.
Note:
• Once MONO mode is selected, the TV sound remains monaural even if the TV set receives a stereo
broadcast. You must switch the mode back to STEREO if you want to hear stereo sound again.
• Selecting MTS while receiving video signals from INPUT terminals does not change the type of
sound; in this case, sound is determined by the video source.
• If "FAO" mode is on, "SPEAKER" mode will automatically turn off. Changing "SPEAKER" setting will
not affect "FAO" mode.
14
FAO
ON
OFF
BALANCE
To increase treble response.
To increase bass response.
To emphasize the right
speaker's volume.
To return all adjustments to factory preset levels.
RESET
VOL l button
To decrease treble response.
To decrease bass response.
To emphasize the left
speaker's volume.
AU I O D SE ECT L
MTS
SPEAKER
FAO
AUD I O A D J UST
(AUDIO SELECT screen)
TREBL E
MENU
STEREO ON A I R
SAP ON A I R
MONO
(CHANNEL call on screen)
: STEREO
: ON
: OFF
0
2 1