Sharp 27F640 Operation Manual page 30

Set Up (Continued)
•
Saving broadcast TV channels into memory
1
Press MENU to access the MAIN MENU
screen, then press CH a/s to move the "E"
mark to "SET UP".
2
Press VOL k/l to access the SET UP
screen, then press CH a/s to move the "E"
mark to "CH SETTING".
3
Press VOL k/l to access the CH SETTING
screen.
4
Press CH a/s to move the "E" mark to "CH
SEARCH", then press VOL k/l to access
the CH SEARCH screen.
To start:
Press VOL k. The tuner will search through
all available channels in your area and add
them into the TV memory.
To stop:
Press VOL l. CH SEARCH will stop at the
current channel and will not add any higher
channels.
5
Press MENU to exit.
Note:
• If you press VOL
program will start again, and the previously memorized channels will
be lost.
•
Adding weak or additional channels or erasing unwanted channels from TV memory
1
Press MENU to access the MAIN MENU
screen, then press CH a/s to move the "E"
mark to "SET UP".
2
Press VOL k/l to access the SET UP
screen, then press CH a/s to move the "E"
mark to "CH SETTING".
3
Press VOL k/l to access the CH SETTING
screen, then press CH a/s to move the "E"
mark to "CH MEMORY".
4
Press VOL k/l to access CH MEMORY.
5
Use CH a/s or REMOTE KEYPAD to select
each desired channel to add or erase.
30
again while in the CH SEARCH mode, auto-
k
CH
MENU
→
CH
CH
→
CH
CH
→
CH
(START)
(STOP)
MENU
CH
MENU
→
CH
CH
→
CH
CH
→
CH
1 2 3
CH
4 5 6
or
7 8 9
ENTER
0 100
CH
CH SETT I NG
EZ SETUP
A I R / CABL E
CH SEARCH
CH MEMORY
(CH SETTING screen)
CH SEARCH
A I R 1 0
STOP START
(CH SEARCH screen)
CH SETT I NG
EZ SETUP
A I R / CABL E
CH SEARCH
CH MEMORY
(CH SETTING screen)