Audio Adjust - Sharp 32SF560 Operation Manual

Audio Select (Continued)
H AUDIO ADJUST
When the "E" mark is at "AUDIO ADJUST", press VOL k/l to
access the AUDIO ADJUST screen. To access the desired item,
press CH a/s. To adjust the audio setting, press VOL k/l.
TREBLE BASS
Selected item
TREBLE
BASS
BALANCE
RESET
6
Press MENU to exit.
An example screen displaying ON AIR Analog Channel when receiving stereo broadcasts
Current channel number
"← ON AIR" will appear next to STEREO or
SAP when receiving STEREO or SAP
broadcasts.
Note:
• Once MONO mode is selected, the TV sound remains monaural even if the TV set receives a stereo
broadcast. You must switch the mode back to STEREO if you want to hear stereo sound again.
• Selecting MTS while receiving video signals from INPUT terminals does not change the type of
sound; in this case, sound is determined by the video source.
• If "FAO" mode is on, "SPEAKER" mode will automatically turn off. Changing "SPEAKER" setting will
not affect "FAO" mode.
BALANCE
VOL k button
To increase treble response.
To increase bass response.
To emphasize the right
speaker's volume.
To return all adjustments to factory preset levels.
RESET
VOL l button
To decrease treble response.
To decrease bass response.
To emphasize the left
speaker's volume.
TREBL E
STEREO ON A I R
SAP ON A I R
MONO
(Analog CHANNEL call on screen)
0
2 1
17