Table of Contents
Advertisement
Program name
Auto clear time
Preheat mode
Auto power shut-off timer
Stream feeding mode
Auto power shut-off setting
Auto paper select mode
Factory default settings are indicated with an asterisk (*).
If you select "0" (OFF) in a program, the corresponding function will be disabled.
Press the START (
3
The entered program number will be steadily lit on the left side of the
copy quantity display and the currently selected parameter number for
the program will blink on the right side.
Select the desired parameter using the right copy quantity
4
(
) key.
The entered parameter number will blink on the right side of the copy
quantity display.
The parameters are shown in the table below.
For example, to change the setting of the auto power shut-off timer to
60 min., enter 2.
Parameters
0 e OFF
1 e 30 sec.
5 e 10 sec.
0 e OFF
1 e 30 sec.
* 1 e 30 min.
2 e 60 min.
* 0 e OFF
1 e ON
0 e OFF
* 1 e ON
0 e OFF
* 1 e ON
5
Press the START (
The right-hand number in the copy quantity display will be steadily lit
and the entered value will be stored.
6
To continue with other user programs, press the CLEAR
(
) key and then repeat steps 2 to 5. To exit the user
program mode, press the light (
All the alarm indicators will go out.
USER PROGRAMS
) key.
* 2 e 60 sec.
3 e 90 sec.
2 e 60 sec.
* 3 e 90 sec.
3 e 90 min.
4 e 120 min.
) key.
4 e 120 sec.
4 e 120 sec.
5 e 240 min.
) key.
39
Advertisement
Table of Contents
