Table of Contents
Advertisement
INTERRUPTING A COPY RUN
INTERRUPT is used to interrupt a long copy run so that another job can be
done.
1
Press the INTERRUPT (
The copier will return to the initial settings.
2
When the copier stops, remove the original(s) and set
the original(s) for interrupt copying.
3
Select the desired available copier functions.
Set the number of copies.
4
5
Press the START (
6
When all INTERRUPT copies are finished, press the
INTERRUPT (
) key again to cancel the INTERRUPT
mode, and remove the original used for interrupt copying.
The previous copy quantity, copy ratio, copy density, and paper size
will be automatically restored.
7
Replace the original for the interrupted job and press the
START (
) key to resume copying.
) key.
) key.
27
Advertisement
Table of Contents
