Table of Contents
Advertisement
SET-UP
Power on
12
6
Store the pressure plate lock which has been
Pressure
removed in step 5 and the screw which has been
plate lock
removed in step 2 in the front of the paper tray.
Screw
7
Ensure that the power switch of the copier is in the
OFF position. Plug the power cord into the nearest
outlet.
8
Turn the power switch on.
9
Load copy paper.
To store the pressure plate lock, rotate the lock to fix it on the
relevant location.
For the AL-1621, follow steps 4 to 6 for both the upper and
lower trays except for storage of the screw.
If you use the copier in a country other than the
country where the copier was purchased, you will
need to make sure that your local power supply
is compatible with your model. If you plug the
copier into an incompatible power supply,
irreparable damage to the copier will result.
Only insert the power cord into a properly
grounded wall socket.
Do not use extension cords or power strips.
Connect the copier to a power outlet which is not
used for other electric appliances. If a lighting
fixture is connected to the same outlet, the light
may flicker.
When loading copy paper for the first time, be sure to turn the
power switch on in advance.
For loading copy paper, see steps 2 to 4 of LOADING COPY
PAPER on page 13. To change the paper size from the factory
default size, see pages 14 and 15.
Advertisement
Table of Contents
