Product Operation
to increase hour or
b. Press
to enter minute-setting mode, the right two numbers on LED panel will flash.
Press
to increase it or
c. Press
gain to save the setting, then press
press
to exit, the current setting will be invalid).
B. Setting the scheduling time
a. In standby or charging status, press
the left two numbers on LED panel will flash, press
to decrease it.
b. Press
to enter minute-setting mode, the right two numbers on LED panel will flash,
press
to increase it or
c. Press
gain to save the setting, then press
if press
to exit, the current setting will be invalid).
C. Cancel the scheduling
Set the scheduling time to 00:00.
Note:
a. Before scheduling, please set the robot time to be the same with real time.
b. The robot will start cleaning at the schedule time of Robot Clock every day.
to decrease it.
to decrease it.
to exit (Before the setting is saved, if
and hold it for 3 seconds to start scheduling, then
to decrease it.
to exit (Before the setting is saved,
11
to increase hour or