Starting Up / Standby / Sleep/Power Off; Scheduling - Blaupunkt BL809 User Manual

d. If the robot is not to be used for a long time, fully charge the battery before use, turn the power
off, remove and store it in a cool, dry place.
e. If the robot is not to be used for more than 3 months, charge the robot for 12 hours, turn the
power off, remove and store it in a cool, dry place.
2. Starting Up / Standby / Sleeping / Power Off
A. Starting up
a. Make sure the power switch is on.
b. In standby mode, press
Note: If robot is in sleep mode, press
up the robot from sleep mode, then press
B. Standby
Standby means robot has its power switched on, waiting for the user's operation. It can be
changed to standby mode by one of the following methods:
a. During robot cleaning, press
b. During robot cleaning, press ON/OFF button on remote control to power off the robot.
C. Sleep
In sleep mode, the robot can only be waken up from
on remote control. In order to save power, you can turn the robot into sleep mode from
standby mode via either of the following methods:
a. Press on main body and hold it for 3 seconds.
b. Robot will automatically enter sleep mode if no command is received for more than 60
seconds.

3. Scheduling

You can schedule the robot to set it to start cleaning automatically at a certain time every day.
Note: The robot can only be set when it is in standby or charging mode. If the robot is in sleep
mode, press on main body or ON/OFF button on remote control to wake up the robot.
If the robot is in cleaning mode, stop it before scheduling.
How to schedule the robot
A. Setting robot clock
a. In standby or charging status, press
the current system time. Then the left two numbers on LED panel will flash.Press
on main body or ON/OFF on remote control to start cleaning.
on main body or ON/OFF on remote control to wake
again, the robot will start cleaning automatically.
on main body to enter standby mode.
button on main body or ON/OFF
to start clock-setting. the LED panel will show
10