Before Operating - Sharp R-430CS Cooking Manual

B E F O R E O P E R A T I N G
• Before operating your new microwave oven make
sure you read and understand this operation
manual completely.
• Before the oven can be used, follow these
procedures:
1. Plug in the oven. Close the door. The oven display
will show SHARP SIMPLY
. CLEAR AND PRESS
2. Touch the Stop/Clear pad.
will appear.
:
3. Set clock.
TO SET THE CLOCK
• Suppose you want to enter the correct time of day
12:30 (A.M. or P.M.).
P R O C E D U R E
Clock
1
Touch Clock pad.
2 1 2 3 0
Enter the correct time
of day by touching the
numbers in sequence.
3
Clock
Touch Clock pad again.
THE BEST PRESS
CLOCK .
D I S P L A Y
ENTER TIME OF
DAY
12:30
12:30
This is a 12 hour clock. If you attempt to enter an
incorrect clock time,
Touch the Stop/Clear pad and re-enter the time.
• If the electrical power supply to your microwave
oven should be interrupted, the display will inter-
mittently show
SHARP
. PRESS CLEAR
the power is reinstated. If this occurs during cook-
ing, the program will be erased. The time of day will
also be erased. Simply touch Stop/Clear pad and
reset the clock for the correct time of day.
NOTE: Your oven can be programmed with the
door open except for Start/Touch On and
Minute Plus.
STOP/CLEAR
Touch the Stop/Clear pad to:
1. Erase if you make a mistake during programming.
2. Cancel timer.
3. Stop the oven temporarily during cooking.
4. Return the time of day to the display.
5. Cancel a program during cooking, touch twice.
9
will appear in the display.
ERROR
SIMPLY THE
AND PRESS CLOCK
BEST
after