Table of Contents
Advertisement
Cleaning Your Carpet
For additional carpet cleaning tips, head to support.BISSELL.com.
Tips Before Cleaning
• If cleaning an entire room, consider moving your furniture to another area.
• Use a dry vacuum cleaner over area before using your deep cleaner.
• Remove any large, solid debris before wet cleaning.
• Pretreat stains with BISSELL® Pretreat to improve performance on coffee stains and ground-in dirt.
1.
Plug into a proper outlet.
4.
Make cleaning passes following steps below. Repeat these
passes until solution being pulled up appears clean.
With Cleaning Formula
1. Hold Spray Trigger
• 1 pass forward
• 1 pass back
2. Release the Spray Trigger
• 1 pass forward
• 1 pass back
IMPORTANT
» Please check manufacturer's tag before cleaning area rugs for any specialized cleaning instructions. We do not recommend deep
cleaning delicate, silk, wool, antique, or area rugs without a manufacturer's tag.
» Do not overwet carpet. Be careful not to run over loose objects or edges of area rugs. Stalling the brush may result in premature
belt failure.
6 BISSELL.com
2.
Turn the machine ON by
pressing the power switch.
With BISSELL
ANTIBACTERIAL Formula
1. Hold Spray Trigger
• 1 pass forward
• 1 pass back
• 1 pass forward
• 1 pass back
For full benefit of
ANTIBACTERIAL
formula, do not make any dry
passes. Dry time may be longer.
3.
Step on the recline pedal
located below the power switch.
5.
Empty the dirty water tank
and refill the clean water tank
as needed.
Advertisement
Table of Contents
