Vivo STAND-V000DL Instruction Manual

Black monitor riser

Table of Contents

Download this manual

Black Monitor Riser

Instruction Manual

SKU: STAND-V000DL

Scan the QR code with your mobile device or follow the link

for helpful videos and specifications related to this product.

https://vivo-us.com/products/stand-v000dl

GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST

help@vivo-us.com

www.vivo-us.com

Chat live with an agent!

309-278-5303

Table of Contents

Need help?

Do you have a question about the STAND-V000DL and is the answer not in the manual?

Page 1 Black Monitor Riser Instruction Manual SKU: STAND-V000DL Scan the QR code with your mobile device or follow the link for helpful videos and specifications related to this product. https://vivo-us.com/products/stand-v000dl GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST help@vivo-us.com www.vivo-us.com 309-278-5303...
Page 2 WARNING! If you do not understand these directions, or if you have any doubts about the safety of the installation, please call a qualified technician. Check carefully to make sure there are no missing or defective parts. Improper installation may cause damage or serious injury. Do not use this product for any purpose that is not explicitly specified in this manual.
Page 3 ASSEMBLY STEPS STEP 1 Place End Panels (A) and Center Panel (B) upside down and lay Connector Plates (D) over predrilled holes. Attach Connector Plates (D) to End Panels (A) and Center Panel (B) using ST5.5x13 Screw (S-B) and a phillips screwdriver. STEP 2 Remove adhesive backing from Rubber Pads (S-C) and stick them to the bottoms of Legs (C).
Page 4 AVG. RESPONSE TIME (within office hrs) - 23% within < 15m - 38% within < 30m - 61% within < 1hr - 83% within < 2hr - 92% within < 3hr FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com...