Page 1
Black Monitor Riser Instruction Manual SKU: STAND-V000D Scan the QR code with your mobile device or follow the link for helpful videos and specifications related to this product. https://vivo-us.com/products/stand-v000d GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST help@vivo-us.com www.vivo-us.com 309-278-5303...
Page 2
WARNING! If you do not understand these directions, or if you have any doubts about the safety of the installation, please call a qualified technician. Check carefully to make sure there are no missing or defective parts. Improper installation may cause damage or serious injury. Do not use this product for any purpose that is not explicitly specified in this manual.
Page 3
ASSEMBLY STEPS STEP 1 Place Panels (A) upside down and lay Connector Plates (C) over predrilled holes. Attached Connector Plates (C) to Panels (A) using ST5.5x13 Screws (S-B) and a phillips screwdriver. STEP 2 Remove adhesive backing from Rubber Pads (S-C) and stick them to the bottoms of Legs (B). STEP 3 Secure Legs (B) to top assembly using M6x10 Screws (S-A) and 4mm Allen Wrench (T-A).
Page 4
AVG. RESPONSE TIME (within office hrs) - 23% within < 15m - 38% within < 30m - 61% within < 1hr - 83% within < 2hr - 92% within < 3hr FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com...
Need help?
Do you have a question about the STAND-V000D and is the answer not in the manual?
Questions and answers