Installing The Wlan Module - Dell ChengMing 3991 Service Manual

Installing the WLAN module

About this task
Steps
1. Connect the antenna cables to the WLAN card [1]
2. Place the WLAN card bracket to secure the antenna cables [2]
3. Align the notch on the WLAN card with the tab on the WLAN card slot. Insert the WLAN card into the connector on the
system board [3]
4. Replace the (M2x3) screw to secure the WLAN card bracket to the WLAN card [4]
Next steps
Next steps
1. Install the side cover.
2. Follow the procedure in After working inside your computer.
Disassembly and reassembly 41