Steps
1. Align and place the power button with optional fingerprint reader and cable on the palm-rest assembly.
2. Replace the (M2x2) screw to secure the power button with optional fingerprint reader to the palm-rest assembly.
Next steps
1. Install the
system
board.
2. Install the fan.
3. Install the
WWAN card
4. Install the
WLAN
card.
5. Install the
3-cell battery
6. Install the
base
cover.
7. Follow the procedure in
Coin-cell battery
Removing the coin-cell battery
Prerequisites
1. Follow the procedure in
60
Removing and installing components
(optional).
or
4-cell
battery.
after working inside your
before working inside your
computer.
computer.