Table of Contents
Advertisement
Next steps
1. Install the
heat
sink.
2. Install the fan.
3. Install the
M.2 2280 SSD card
4. Install the
WWAN card
5. Install the
WLAN
card.
6. Install the
3-cell battery
7. Install the
base
cover.
8. Install the
SIM
card.
9. Install the
microSD
card.
10. Follow the procedure in
Power-button and fingerprint reader
Removing the power button
Prerequisites
1. Follow the procedure in
2. Remove the
base
cover.
3. Remove the
3-cell battery
4. Remove the
WLAN
card.
5. Remove the
WWAN card
6. Remove the fan.
7. Remove the
system board
NOTE:
The system board can be removed with the heat sink attached in order to simplify the procedure and preserve
the thermal bond between the system board and heat sink.
About this task
The following images indicate the location of the power-button and provide a visual representation of the removal procedure.
56
Removing and installing components
or
M.2 2230 SSD
(optional).
or
4-cell
battery.
after working inside your
before working inside your
or
4-cell
battery.
(optional).
card.
computer.
computer.
Advertisement
Table of Contents
