Bluetooth Connection - EDIFIER TWS5 User Manual

Power ON/OFF
●
1. Power on automatically when taken out from the charging case;
2. Power off automatically while placed in the charging case.

Bluetooth Connection

●
1. Two Earbuds Mode
•
Open the charging case to take two earbuds out, they will automatically
turn on and make interconnection;
•
Press and hold the multi-function button of the left earbud to enter
pairing state, the red and blue lights will flash rapidly;
•
Set mobile phone to search and connect to "EDIFIER TWS5", after
pairing is successful, the blue light will flash slowly.
2. One Earbud Mode
If uses one earbud only, please take the left or right earbud out of the
charging case, and refer to the procedures mentioned in
"Two Earbuds Mode"to pair it with mobile phone.
TWS Pairing of the Left and Right Earbuds
●
The left and right earbuds have finished TWS pairing before leaving
factory. If the wireless connection fails to resume, please follow the steps
below to re-pair:
1. When there is no TWS connection, respectively double click the
multi-function button of the left and right earbuds to enter TWS
pairing state, the blue light will flash rapidly;
2. After pairing is done, blue lights of both earbuds will flash slowly.