EDIFIER Uni-Buds - True Wireless Stereo Earbuds Manual

• There are different size of ear tips and ear wings attached in the package, please select the suitable ones to wear.
• Images are for illustrative purposes only and may differ from the actual product.

User guide

• Charge the earbuds

  • Place the earbuds in the charging case, it will auto-charge the earbuds when the case is closed.

• Charge the charging case

  • Connect the charging case to power source with the included Type-C charging cable for charging.
  • Rated input:
    5V 60mA (earbuds)
    5V 500mA (charging case)

• Power display

  • When the charging case closed, press the button to check the battery level on the case;
  • When the charging case opened, press the button to check the battery level of the case and earbuds;
  • Low battery display: when the charging case opened, the low battery icon flashes automatically for around 3 seconds and then turns off.

• Low battery display

  • When the charging case has only 10% remaining power, it will enable the low battery protection function. The button will not work at this time, and the charging case can power on/off only.
    

• Power on

  • When in the charging case, power on automatically while the case is opened.

• Power off

  • When placed in the charging case, power off automatically while the case is closed.

Bluetooth connection

• Connection of earbuds and mobile phone

  • Place the earbuds in the charging case, press and hold the button on the case for around 3 seconds to enter Bluetooth pairing, the Bluetooth icon on the screen flashes.
  • Set mobile phone to search and connect to the Bluetooth name, take out the earbuds after pairing is successful.

• TWS pairing of the left and right earbuds

  • When TWS pairing is not connected, place the earbuds in the charging case, press and hold the button on the case for approx. 6 seconds to enter TWS pairing, the left and right ear icons on the display screen flash alternately. Note: This function will not work when TWS pairing is done.

• Restore to factory settings

  • Place the earbuds in the charging case, press and hold the button on the case for approx. 10 seconds to restore to factory settings. Note: Restoring the factory settings will clear the pairing records between earbuds and the mobile phone, and it will also restore the settings in the APP to the factory settings.

1. Display Screen
2. Press: battery display
   Press and hold for 3 seconds: Bluetooth pairing
   Press and hold for 6 seconds: TWS pairing
   Press and hold for 10 seconds: Restore to factory settings

Rated input: 5V60mA (earbuds)
5V500mA (charging case)
Note: To avoid misoperation, the button will only respond when the charging case is opened.

Icons description

Open the case	Close the case	Place the earbuds in the case	Bluetooth pairing
TWS pairing	Pairing successful	Pairing failed	Clear pairing records
Battery display of the earbuds	Battery display of charging case	Low battery prompt of charging case

Functional operation instructions

• Call
  

1. Accept/end a call: double click the left earbud
2. Accept/end a call: double click the right earbud

• Music playback
  

1. Voice assistant: double click the left earbud
   Previous track: triple click the left earbud
2. Pause/play: double click the right earbud
   Next track: triple click the right earbud

FAQs

When charging the charging case, the battery icon does not display

• Please ensure the charging case is correctly connected with power source.
• If the earbuds are not used for a long time, the battery will not respond at once. At this time, recharge for about 30 minutes to back to the charging state.

No sound

• Check if the earbuds are operating.
• Check if the earbuds volume are at an appropriate level.
• Check if the earbuds are correctly connected with mobile phone.
• Check if the earbuds are operating within a normal working range.

The call quality of the earbuds are not good.

• Check if mobile phone is in an area with strong signal.
• Please ensure the earbuds are within effective distance (10m) and no obstacle between the earbuds and mobile phone.

When playing music, cannot control pause/play/previous/next track via the earbuds.

• Please ensure the paired device support AVRCP (Audio/Video Remote Control Profile) profile.

Tap sensitivity is not good

• Please make sure to touch in the effective tap zone of the earbuds and the intensity/angle is moderate; if the tap sensitivity setting of this earbuds does not meet your usage habits, you can adjust it to suit your tap sensitivity in EDIFIER CONNECT.

After one earbud is connected to another device, the other earbud has no sound when used again

• When connected one earbud to another device separately, the pairing records of the left and right earbuds may be lost. To back to the two earbuds mode, press and hold the button of the charging case for 6 seconds to reconnect the left and right earbuds.

Maintenance

• Keep the product away from humid places to avoid affecting internal circuit.
• Do not put the product in places exposed to sun or with high temperature. High temperature will shorten service life of electronic components, damage battery and make plastic components deformed.
• Do not put the product in cold places to avoid damaging internal circuit board.
• Do not dismantle the product. Non-professional personnel may damage the product.
• Do not drop, strongly vibrate, strike the product with hard object to avoid damaging internal circuit.
• Do not use drastic chemicals or cleaner to clean the product.
• Do not use sharp objects to scratch product surface to avoid damaging shell and affecting facade.

Edifier International Limited
P.O. Box 6264
General Post Off ice Hong Kong
www.edifier.com
2020 Edifier International Limited. All rights reserved.
Printed in China

NOTICE:
For the need of technical improvement and system upgrade, information contained herein may be subject to change from time to time without prior notice.
Products of EDIFIER will be customized for different applications. Pictures and illustrations shown on this manual may be slightly different from actual product. Images are for illustrative purposes only and may differ from the actual product.